Removal And Installation: Piston: Notes
WARNING: This page is about a different car, the 2014 Volkswagen Beetle and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Drip Tray V.A.G 1306 or Drip Tray for Workshop CraneVAS 6208
- Torque Wrench 5-50 Nm V.A.G 1331
- Torque Wrench 40-200 Nm V.A.G 1332
- Hose Clip Pliers
- Polydrive Bit Drive Socket T10070 or Polydrive Bit Drive Socket 3452
- Puller - Ignition Coil T40039
- Silicone Sealant D 174 003 A2