Fastener Tightening Specifications
WARNING: This page is about a different car, the 2014 Volkswagen Beetle and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
| Component | Fastener Size | Nm |
|---|---|---|
| Air conditioning condenser to radiator bolt | - | 5 |
| Bracket with screw-type clamp | - | 3 |
| Bracket with screw-type clamp to guide tube bolt | - | 25 |
| Flange to cylinder head nut | - | 10 |
| Condenser to radiator bolt | - | 5 |
| Connecting piece to lower radiator bolt | - | 5 |
| Coolant fan to fan shroud nut | - | 5 |
| Coolant fan to intake air elbow | - | 5 |
| Coolant hose bracket to accessory bracket bolt | - | 9 |
| Coolant line to cylinder block bolt/nut | - | 10 |
| Coolant pump to cylinder block bolt | - | 10 |
| Coolant thermostat housing to cylinder block bolt | - | 25 |
| Engine oil cooler to cylinder block bolt | - | 25 |
| Expansion tank to body bolt | - | 2 |
| Fan shroud to radiator bolt | - | 5 |
| Heated oxygen sensor bracket bolt | - | 10 |
| Oil filter bracket to cylinder block bolt | - | 25 |
| Pre-heater bracket/oil dipstick guide tube to cylinder block bolt | - | 25 |
| Radiator mount to lock carrier bolt | - | 7 |
| Thermostat housing cover to thermostat housing bolt | - | 5 |