Bulkhead Overview: Materials

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Use material part numbers.

1K window adhesive ¹⁾²⁾³⁾
Activator ¹⁾
Glass/Paint primer ¹⁾
Cleaning Solution ¹⁾
Primer applicator ¹⁾

¹⁾ Follow the manufacturer instructions supplied in the packaging.

²⁾ Note the minimum curing time, refer to MINIMUM CURING TIME FOR BONDED WINDOWS .

³⁾ Heat according to manufacturer's instructions using Cartridge Heater VAG 1939A or Cartridge Heater VAG 1939A.

NOTE: The bulkhead -1- is bolted and also bonded in with PUR adhesive sealant -4-.

Fig 1: Identifying Bulkhead

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Bulkhead
- Removing:
  -- Cut through the bead of adhesive -4- after removing the screws -3-.
Body Flange
Bolt
- 25 Nm
- Quantity: 10
PUR adhesive sealant
- Part number.
- Bead diameter: width -a- = 8 mm, height -B- = 10 mm
- Minimum curing time, refer to MINIMUM CURING TIME FOR BONDED WINDOWS .