LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Exterior Equipment (Convertible)) >> 66 Exterior Equipment >> Description And Operation >> Underbody Panels Overview >> Underbody Panels Overview, Sedan

Underbody Panels Overview, Sedan

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

The figure shows the right side. The left side is derived accordingly from this.

Fig 1: Removing/Installing Underbody Trim Panel
GWWM50-10040Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
  1. Underbody Panel
    • Removing:

      -- Remove the nuts -2-.

      -- Pull the underbody panel toward the rear off the cover -3- and remove it.

  2. Nut
    • 2 Nm
    • Quantity: 8
    • Held in place by the tabs on the underbody trim panel
  3. Cover
    • Removing:

      -- Turn the cover 90° counterclockwise.

      -- Remove the cover from the mount.