LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 63 (2.5L - Exhaust System, Emission Controls - Engine Code(S): CBTA & CBUA (Convertible)) >> 26 Exhaust System, Emission Controls >> Removal And Installation >> Catalytic Converter >> Tightening Specifications

Tightening Specifications

WARNING: This page is about a different car, the 2014 Volkswagen Beetle and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Component Tightening specification
Front exhaust pipe to exhaust manifold
  • Replace nuts
 25 Nm, refer to (1).
Mount to subframe 25 Nm
Clamp 25 Nm
(1) Coat stud bolts on exhaust manifold with Hot Bolt Paste G 052 118 A3.
scientia non olet · About LEMON Manuals