Secondary Air Injection Solenoid Valve -N112-: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, and 2014 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the air filter housing, refer to AIR FILTER HOUSING .

-- Remove the battery tray, refer to Battery, Starter, Generator, Cruise Control .

-- Disconnect the connector -3-.

Fig 1: Identifying Connecting Pipe And Connector

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

-- Squeeze the locking ring on both side and remove the connecting pipe -1-.

-- Remove the bolts -arrows-.

-- Push the coolant pipe -2- gently aside.

Fig 2: Locating Bolts

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

-- Remove the bolts -arrows- and the Secondary Air Injection Solenoid Valve -N112-.