Rear Muffler, Twist Beam Suspension: Joining

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, and 2014 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Separating Point

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

NOTE: A 2nd technician is required to tighten the rear clamping sleeve, refer to CLAMPING SLEEVE LOCATIONS .

-- Secure the front muffler in the mounts. The front clamp remains loosely connected to pipes.

-- Align the rear muffler horizontally and hold it in this position.

-- Position the clamping sleeves with both outer markings and tighten them to 23 Nm.

-- Align the exhaust system free of tension, refer to EXHAUST SYSTEM, INSTALLING WITHOUT TENSION .