LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (1.8L & 2.0L - Exhaust System, Emission Controls - Engine Code(S): CPKA, CPLA, CPPA & CPRA (Convertible)) >> 26 Exhaust System, Emission Controls >> Removal And Installation >> Rear Muffler >> Rear Muffler, Multi-Link Suspension >> Removing

Rear Muffler, Multi-Link Suspension: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, and 2014 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Cabriolet 

-- Remove the subframe crossbrace -3-, refer to Subframe Overview .

Fig 1: Identifying Subframe Crossbrace
GWWN42-10542Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

-- Hold the exhaust system tight and push the suspended mounts out of the brackets.

Continuation for all vehicles 

-- Loosen the bolts on the rear muffler and remove the exhaust system.