Exhaust System, Installing Without Tension: Procedure

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, and 2014 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Align the exhaust system when cold.

NOTE: The arrow symbol points in the direction of travel.

-- Loosen the screws for the front clamping sleeve -arrow-.

Fig 1: Locating Clamping Sleeve Screws

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

-- Push the exhaust system far enough forward until the pre-load on the retaining loops at the exhaust pipe -a- = 9 mm.

Fig 2: Identifying Tail Pipe Aligning

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.