Overview - Emissions Control
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, and 2014 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
- Bracket
- For catalytic converter
- To subframe
- Catalytic Converter
- With front exhaust pipe
- Protect catalytic converter from shocks and impact stress
- Removing and installing, refer to CATALYTIC CONVERTER WITH FRONT EXHAUST PIPE .
- V-Clamp
- Replace after removing
- Tightening specification, refer to OVERVIEW - TURBOCHARGER .
- Seal
- Replace after removing
- Turbocharger
- Removing and installing, refer to TURBOCHARGER .
- Front Clamping Sleeve
- Before tightening, align exhaust system free of tension, refer to CLAMPING SLEEVE LOCATIONS .
- Tighten threaded connections evenly.
- Bolt
- 23 Nm