Removal And Installation: Insulation: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

The noise insulation is not installed in all models.

Fig 1: Identifying Insulation

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the retaining clips -3- (8 pieces) from the hood -1- with the Pry Lever 80-200.

-- Remove the noise insulation -2- from the oblong holes in the hood -1-.