LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (Exterior Body Panels (Hood, Lids) (Convertible)) >> (55 Hood, Lids) >> Description And Operation >> Rear Lid, Adjusting, Convertible >> Adjusting Buffer, Removing and Installing >> Installing

Adjusting Buffer, Removing and Installing: Installing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Adjusting Buffer
GWWM55-10098Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Insert the adjusting buffer -1- at a right angle into the rear lid -1- -arrow a-.

-- Then turn adjusting buffer 90 degrees to the right -arrow b-.

scientia non olet · About LEMON Manuals