LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Seat Frames (Convertible)) >> 72 Seat Frames >> Removal And Installation >> Rear Seats >> Seat Bench/Single Seat >> Installing

Seat Bench/Single Seat: Installing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Before installation, check the 2 mounts -2- for damage and replace if necessary.

Fig 1: Identifying Bench Seat And Mounts
GWWM72-10036

-- Slide the bench seat -1- at a 45° angle under the backrest.

NOTE:

The bench seat brackets must be located behind the pipe in the lower backrest area after their installation -arrow- .

-- Clip the bench seat into the mounts -2- .

scientia non olet · About LEMON Manuals