LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Seat Frames (Convertible)) >> 72 Seat Frames >> Removal And Installation >> Rear Seats >> Rear Seat Backrest Locking Mechanism, Convertible >> Removing

Rear Seat Backrest Locking Mechanism, Convertible: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Pull the Release Lever -1- and release the backrest.

Fig 1: Identifying Release Lever
GWWM72-10028

-- Pull and hold the Release Lever -1- and remove the pin -arrow- from the expanding rivet.

-- Pry out and remove the rear backrest release control -2- using the Trim Removal Wedge3409.

-- Disconnect the release cable -1- from the backrest release -2- in direction of -arrow- .

Fig 2: Identifying Release Cable And Backrest Release
GWWM72-10052

-- Disengage the ball stud -1- on the release cable -arrow- and remove the rear backrest release -2- .

Fig 3: Identifying Ball Stud On Release Cable
GWWM72-10041