Rear Seat Backrest Locking Mechanism, Convertible: Installing
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Observe the following when doing so:
-- Insert the rear Release Lever -1- into the opening -arrow- and then pivot it into the trim panel in direction of -arrow- .
-- Pull the Release Lever -1- .
-- Pull and hold the Release Lever -1- and install the pin into the expanding rivet -arrow- .