LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Seat Frames (Convertible)) >> 72 Seat Frames >> Removal And Installation >> Rear Seats >> Rear Seat Backrest Locking Mechanism Cable >> Removing

Rear Seat Backrest Locking Mechanism Cable: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the rear seat backrest. Refer to REAR SEAT BACKREST, CONVERTIBLE .

-- Unclip the release cable -1- on the rear seat backrest from the bracket.

Fig 1: Identifying Release Cable
GWWM72-10050

-- Turn the release cable -1- approximately 90° in direction of -arrow- and disengage it from the rear seat backrest -arrow- .

-- Disconnect the release cable -1- from the backrest release -2- in direction of -arrow- .

Fig 2: Identifying Release Cable And Backrest Release
GWWM72-10052

-- Disengage the ball stud -1- on the release cable -arrow- and remove the rear backrest release -2- .

Fig 3: Identifying Ball Stud On Release Cable
GWWM72-10041