Rear Seat Backrest Frame, Convertible: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the bench seat. Refer to SEAT BENCH/SINGLE SEAT .

CAUTION:

Do not press the rear seat backrests onto the center backrest mounting! To prevent damage to the backrest cover, place a foam piece or similar material between the backrest mounting and the backrest!

-- Remove the cover and cushion. Refer to REAR SEAT BACKREST COVER AND CUSHION, CONVERTIBLE .

-- Remove the 8 bolts -arrows- on the front side.

Fig 1: Identifying Bolts

-- Using a screwdriver, pry caps -2- and -3- on both sides out of the mounts on the rear side of the backrest -1- .

Fig 2: Identifying Pry Caps

-- Remove the 8 bolts -arrows- on the rear side.

Fig 3: Identifying Bolts

-- Remove the backrest shells -1- and -2- upward from backrest frame.