LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Seat Frames (Convertible)) >> 72 Seat Frames >> Removal And Installation >> Rear Seats >> Backrest Release Pressure Pin >> Installing

Backrest Release Pressure Pin: Installing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Installation is reverse of removal, noting the following:

-- Insert the backrest release pressure pin into the opening in the body and press it in until it clicks.

scientia non olet · About LEMON Manuals