LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Seat Frames (Convertible)) >> 72 Seat Frames >> Removal And Installation >> Front Seats >> Seat Height Adjustment Handle >> Installing

Seat Height Adjustment Handle: Installing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Seat Height Adjustment And Lever
GWWM72-10031

Installation is reverse of removal, noting the following:

-- Perform a visual inspection of the retaining strap -arrow- .

-- If damage can be seen on the tab, installed a new seat height adjustment handle -1- .

-- Make sure the tab in the seat height adjustment handle fits correctly into the notch on the lever.

scientia non olet · About LEMON Manuals