Entry Assist Release Cable A: Removing
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the front seat. Refer to FRONT SEAT
-- Remove the trim on the tunnel side. Refer to TUNNEL-SIDE SEAT TRIM .
-- Move the backrest forward as far as the stop using the handwheel.
-- Disengage the entry assistance cable A bracket -1- from the seat forward/back adjustment -2- .
-- Disengage the entry assistance release cable A -1- at the seat forward/back adjuster -2- and remove it.
Fig 2: Disengage Entry Assistance Release Cable A -1- At Seat Forward/Back Adjuster -2- And Remove It
-- Remove the entry assistance release cable A -1- from the backrest hinges.
-- Remove the guides for the entry assistance release cable A -2- from the lower seat frame.