LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Seat Frames (Convertible)) >> 72 Seat Frames >> Removal And Installation >> Front Seats >> Entry Assist Cable B >> Removing

Entry Assist Cable B: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the front seat. Refer to FRONT SEAT 

-- Remove the trim on the tunnel side. Refer to TUNNEL-SIDE SEAT TRIM .

-- Move the backrest forward as far as the stop using the handwheel.

-- Disengage the entry assistance cable B -3- for the seat forward/back adjustment -2- .

Fig 1: Identifying Entry Assistance Release Cables
GWWN72-10424

-- Remove the entry assistance cable B eyelets -3- from the seat rail bolts -arrow- .

-- Remove the backrest from the tunnel side.

-- Remove the entry assistance cable B eyelets -1- from the backrest hinges -arrow- .

Fig 2: Identifying Entry Assistance Cable B Eyelets
GWWM72-10039

-- Press the tabs together -arrow- and remove the entry assistance cable B -1- from the backrest hinges.

Fig 3: Identifying Entry Assistance Cable B
GWWM72-10040

-- Remove the entry assistance cable B -1- through the slits for the backrest hinges.