Knock Sensor 1 -G61-: Removing
WARNING: This page is about a different car, the 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
-- Disconnect the knock sensor 1 connector -2-.
Fig 1: Camshaft Position Sensor G40 / Intake Manifold Runner Position Sensor G336, Knock Sensor (KS) 1 G61 & Fuel Injectors 8-Pin Harness Connector Electrical Harness Connectors
-- Remove the coolant pump. Refer to COOLANT PUMP .
NOTE:
The knock sensor 1 is located below the intake manifold behind the coolant pump.
-- Remove the knock sensor 1.