LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (1.8L & 2.0L - Ignition/Glow Plug System - Engine Code(S): CPKA, CPLA, CPPA & CPRA (Convertible)) >> 28 Ignition/Glow Plug System >> Removal And Installation >> Knock Sensor 1 -G61- >> Removing

Knock Sensor 1 -G61-: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, and 2014 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Disconnect the connector -2- from Knock Sensor 1 -G61-.

Fig 1: Locating Connectors
GWWA24-11095Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the coolant pump with thermostat, refer to COOLANT THERMOSTAT HOUSING .

NOTE:

The Knock Sensor 1 -G61- is located below the intake manifold behind the coolant pump.

-- Remove the Knock Sensor 1 -G61- bolt -arrow- and remove the Knock Sensor 1 -G61-.

Fig 2: Locating Knock Sensor Bolt
GWWA28-10028Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.