LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (1.8L & 2.0L - Ignition/Glow Plug System - Engine Code(S): CPKA, CPLA, CPPA & CPRA (Convertible)) >> 28 Ignition/Glow Plug System >> Removal And Installation >> Knock Sensor 1 -G61- >> Installing

Knock Sensor 1 -G61-: Installing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, and 2014 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Install in reverse order of removal. Note the following:

-- Note the installed position of the Knock Sensor 1 -G61- -arrow-.

Fig 1: Locating Knock Sensor Bolt
GWWA28-10028Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the coolant pump with thermostat, refer to COOLANT THERMOSTAT HOUSING .

scientia non olet · About LEMON Manuals