Engine Speed Sensor -G28-: Notes

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, and 2014 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the noise insulation, refer to Overview - Herbie Beetle Decorative Film .

-- Loosen the hose clamp -3- and -5-.

Fig 1: Identifying Senors And Clamps

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the connector from the Charge Air Pressure Sensor - G31- -arrow-.

-- Remove the bolts -1- and -4- and then remove the air guide pipe downward.

-- Disconnect the connector -1- on the Engine Speed Sensor -G28-.

Fig 2: Identifying Engine Speed Sensor And Bolt

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolt -arrow-.