Camshaft Position Sensor -G40-: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, and 2014 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the engine cover, refer to ENGINE COVER .

-- Remove the intake manifold, refer to INTAKE MANIFOLD .

-- Disconnect the connector -2-.

Fig 1: Identifying Camshaft Position Sensor, Connector And Bolt

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolt -arrow- and camshaft position sensor -1-.