Overview - Ignition System
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, and 2014 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- 10 Nm
- Ignition Coil with Power Output Stage
- Ignition Coil 1 with Power Output Stage -N70-
- Ignition Coil 2 with Power Output Stage -N127-
- Ignition Coil 3 with Power Output Stage -N291-
- Ignition Coil 4 with Power Output Stage -N292-
- Ignition coils with power output stage and spark plug connectors can be obtained individually for repairs
- Removing and installing, refer to IGNITION COILS WITH POWER OUTPUT STAGES -N70-, -N127-, -N291- AND -N292- .
- Spark Plug
- 30 Nm
- Bolt
- 20 Nm
- Replace after removing
- The tightening specification affect how the knock sensor functions
- Knock Sensor 1 -G61-
- Contacts gold plated
- Removing and installing, refer to Knock Sensor 1 -G61- .
- Camshaft Position Sensor -G40-
- Camshaft Position Sensor -G40-, Removing and Installing, refer to Camshaft Position Sensor -G40- .
- Replace O-ring
- Bolt
- 9 Nm
- Engine Speed Sensor -G28-
- Check the O-ring for damage
- Removing and installing, refer to Engine Speed Sensor -G28- .
- Bolt
- 10 Nm