Fuel Injector Seals

WARNING: This page is about a different car, the 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Carrier 3390

Procedure

Fig 1: Identifying Torque Adapter And Short Extension

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the cylinder head cover. Refer to CYLINDER HEAD COVER .

-- Remove the fuel injector seal with the Carrier 3390 and the short extension -1- upward from below.

-- Install the new fuel injector seal with the Carrier 3390 and short extension -1- all the way and from above.

Fig 2: Identifying Torque Adapter And Short Extension

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the cylinder head cover. Refer to CYLINDER HEAD COVER .