LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (2.5L - Cylinder Head & VALVETRAIN - Engine Code(S): CBTA & CBUA (Convertible)) >> 15 Cylinder Head, VALVETRAIN >> Specifications >> Fastener Tightening Specifications >> Cylinder Head Cover Bolt Tightening Sequence and Specification

Cylinder Head Cover Bolt Tightening Sequence and Specification

WARNING: This page is about a different car, the 2014 Volkswagen Beetle and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Cylinder Head Cover Bolt Removal Sequence
GWWM15-0193Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Tighten the cylinder head cover bolts -1 through 16- in the sequence shown to 10 Nm.

scientia non olet · About LEMON Manuals