Lower Timing Chain Cover Bolt Tightening Sequence and Specification

WARNING: This page is about a different car, the 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Lower Timing Chain Cover Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Tighten the bolts in 3 passes in sequence -1 through 15- as follows:

Tighten the bolts by hand.
Tighten the bolts to 8 Nm.
Tighten the bolts an additional 45° (1/8) additional turn.