LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (2.0L - Cylinder Head & VALVETRAIN - Engine Code(S): CBFA & CCTA (Convertible)) >> 15 Cylinder Head, VALVETRAIN >> Removal And Installation >> Vacuum Pump >> Installing

Vacuum Pump: Installing

WARNING: This page is about a different car, the 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Tightening specifications, refer to CYLINDER HEAD OVERVIEW .

-- Clean the sealing surfaces.

-- Install the seal on the vacuum pump, install the 2 bolts and then mount it to the cylinder head.

The rest of the installation is performed in the reverse order of removal.

scientia non olet · About LEMON Manuals