Upper Timing Chain Cover: Installing

WARNING: This page is about a different car, the 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Coat the seal and the O-ring with engine oil.

-- Tighten the bolts by hand in sequence -1 through 5-.

Fig 1: Identifying Upper Timing Chain Cover - Tightening Sequence

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Tighten the bolts to 9 Nm using the torque wrench V.A.G 1783 and the open end spanner insert AF 10 V.A.G 1783/1.

For the correct tightening specifications, refer to TIMING CHAIN COVER OVERVIEW .

Further installation is in the reverse order of removal.