Cylinder Head: Notes
WARNING: This page is about a different car, the 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Engine Sling 2024 A
- Engine Support T10014
- Assembly Tool T10352
- Counter Hold Tool T10355
- Locking Pin T40011
- Ignition Coil Puller T40039
- Torque Wrench (5-50 Nm) V.A.G 1331
- Torque Wrench (40-200 Nm) V.A.G 1332
- Shop Crane - Load Cap = 700-1200 KG VAS 6100
- Engine Bung Set VAS 6122
- Drip Tray for VAS 6100 VAS 6208
- Polydrive Bit and Drive Socket T10070
- Cable Ties