Removal And Installation: Camshafts: Notes
WARNING: This page is about a different car, the 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Thrust Piece T10174
- Assembly Tool T10352
- Counter Hold Tool T10355
- Locking Pin T40011
- Ignition Coil Puller T40039
- Torque Wrench (5-50 Nm) V.A.G 1331
- Silicone Sealant D 154 103 A1
- Cable Ties
- Flat Scraper
- Hand Drill with Plastic Brush Attachment
- Protective Eyewear