Fastener Tightening Specifications
WARNING: This page is about a different car, the 2015 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
| Components | Fastener Size | Nm |
|---|---|---|
| Bracket for electrical wires bolt | - | 8 |
| Camshaft adjustment valve 1 bolt | - | 8 |
| Camshaft toothed belt gear bolt | - | 100 |
| Connection for coolant hose bolt | - | 10 |
| Cover bolt | - | 8 |
| Control valve bolt | - | 50 |
| Crankshafts - toothed belt gear bolt 1 | - | 180 + 135° |
| Crankshaft Holder | - | 9 |
| Cylinder head - tightening specification and sequence | - | Refer to Figure |
| Damper roller bolt | - | 20 |
| Damper roller nut | - | 20 |
| Differential pressure sensor line bolt | - | 5 |
| Engine lifting eye | - | 20 |
| Heat shield bolt | - | 5 |
| Lower toothed belt guard bolt | - | 12 |
| Tensioning roller nut 1 | - | 20 + 45° |
| Rear toothed belt cover | - | 12 |
|
||