Vacuum Pump: Installing
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, and 2014 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
-- Clean the sealing surfaces.
-- Turn the vacuum pump coupling plate so that it engages in the camshaft groove when installing the vacuum pump.
-- Install new deal on the vacuum pump, stick the two bolts through and install the vacuum pump withe new seal on the cylinder head.
-- While doing so pay attention that it lays flush on the flange.
Assemble in reverse order of disassembly.
-- Install the high pressure pump with roller tappet, refer to HIGH PRESSURE PUMP .
Tightening Specifications
- Vacuum pump to cylinder head, bolt -item 30.