Camshaft Adjustment Valve 1 -N205-: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, and 2014 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the engine cover, refer to ENGINE COVER .

-- Unclip the coolant and fuel lines and set them aside.

-- Disconnect the connector -1- from the Camshaft Adjustment Valve 1 -N205-.

Fig 1: Identifying Bolts And Camshaft Adjustment Valve 1

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -arrows- and then the Camshaft Adjustment Valve 1 -N205- -2-.