WIPER FRAME WITH LINKAGE AND Windshield Wiper Motor -V-

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Removal

-- Turn off the ignition and all electrical consumers and remove the ignition key.

-- Remove the windshield wiper arms, refer to WINDSHIELD WIPER ARM .

-- Remove plenum chamber cover, refer to Description and Operation .

-- Disengage the connector -1- and disconnect.

Fig 1: Identifying Wiper Motor Components

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -arrows- and remove the wiper frame -2- from the vehicle.

Installation

Install in reverse order of removal. Note the following:

Tightening Specifications

Refer to FASTENER TIGHTENING SPECIFICATIONS .