TV Card Reader: Removing
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
-- Switch off the ignition and all electrical consumers and remove the ignition key.
-- Open the glove compartment.
-- Remove the chip card.
The TV Card Reader -R204- -1- is glued directly to the glove compartment trim panel at the top of the glove compartment. The Chip Card Reader Control Module -J676- is glued to the TV Card Reader -R204-.
-- Loosen the TV Card Reader -R204- with a small screwdriver.