Oil Level Thermal Sensor -G266-: Removing

WARNING: This page is about a different car, the 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Drain engine oil. Refer to Maintenance, Diagnosis .

-- Disconnect the connector -arrow- on the oil level thermal sensor -G266-.

Fig 1: Identifying Connector From Oil Level Thermal Sensor

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- If equipped, loosen the fasteners -arrows- and remove the oil pan noise insulation -1-.

Fig 2: Identifying Oil Pan Noise Insulation

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -1- and the Oil Level Thermal Sensor -G266- -4-.

Fig 3: Identifying Oil Level Thermal Sensor G266

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.