LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (2.0L - Engine Lubrication - Engine Code(S): CJAA & CVCA (Convertible)) >> 17 Engine Lubrication >> Diagnosis And Testing >> Oil Pressure, Checking

Oil Pressure, Checking

WARNING: This page is about a different car, the 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required 

Procedure

NOTE:

The specified values pertain to oil temperatures from approximately 80° C (176° F). Remove the dip stick or higher oil temperatures. Check, if necessary, if the oil temperature for this test is too high (> 120° C (> 248° F)), and if the specified values are not attained.

-- Remove the Oil Pressure Switch -F1-. Refer to Oil Pressure Switch -F1- .

-- Connect the Oil Pressure Gauge V.A.G 1342 in the opening for the Oil Pressure Switch -F1-.

-- Install an old oil pressure switch into the hole on the Oil Pressure Gauge V.A.G 1342.

-- Start the engine.