Oil Separator: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, and 2014 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Oil Separator Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the Ignition Coil 3 With Power Output Stage -N291- and Ignition Coil 4 With Power Output Stage -N292-, refer to IGNITION COILS WITH POWER OUTPUT STAGES -N70-, -N127-, -N291- AND -N292- .

-- Loosen the hose clamp -1- and remove the hose from the EVAP Canister Purge Regulator Valve 1 -N80-.

-- Remove bolt -2- and then remove crankcase ventilation hose -3- from oil separator.

-- Remove the bolts -arrows- and the oil separator.