LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (1.8L & 2.0L - Lubrication - Engine Code(S): CPKA, CPLA, CPPA & CPRA (Convertible)) >> 17 Lubrication >> Removal And Installation >> Oil Pump >> Removing

Oil Pump: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, and 2014 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Locating Oil Baffle Bolt
GWWA17-10746Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the oil pan lower section, refer to OIL PAN LOWER SECTION .

-- Remove bolt -arrow- and oil baffle.

-- Pull the chain tensioner spring using the Elbow Assembly Tool T10118 in direction of -arrow- and secure it with the Chain Tensioner Locking Tool T40265.

Fig 2: Identifying Chain Tensioner Spring, Remove/Install Components
GWWA17-10747Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -arrows- and the oil pump.

Fig 3: Locating Oil Pump Bolts
GWWA17-10749Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.