Oil Pressure Regulation Valve -N428-: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, and 2014 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the noise insulation, refer to Overview - Herbie Beetle Decorative Film .

-- Remove the ribbed belt, refer to RIBBED BELT .

-- Place the Used Oil Collection and Extraction Unit SMN372500 under the engine.

-- Disconnect the connector -1-.

Fig 1: Identifying Oil Pressure Regulation Valve

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolt -2- and the Oil Pressure Regulation Valve -N428- -3-.