LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (1.8L & 2.0L - Lubrication - Engine Code(S): CPKA, CPLA, CPPA & CPRA (Convertible)) >> 17 Lubrication >> Removal And Installation >> Oil Pan Upper Section >> Removing

Oil Pan Upper Section: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, and 2014 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the oil pan lower section, refer to OIL PAN LOWER SECTION .

-- Remove the rear sealing flange, refer to SEALING FLANGE, TRANSMISSION SIDE .

-- Remove the oil pump, refer to OIL PUMP .

-- Disconnect the connector -1-.

Fig 1: Identifying Oil Pressure Regulation Valve
GWWA17-10826Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
NOTE: Ignore item -2-.

-- Remove the bolts -arrows-.

Fig 2: Identifying Bolts
GWWN17-10200Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -1 through 14- and the upper section of the oil pan.

Fig 3: Oil Pan Upper Section - Tightening Sequence
GWWA17-10823Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
CAUTION: First pry the oil pan upper section out on the transmission side. When prying out, be careful not to bend the timing chain cover.