Oil Level Thermal Sensor -G266-: Removal

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, and 2014 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

The engine oil is drained, refer to => 14.2Engine Oil, Draining or Extracting and Filling, Replacing Oil Filter.

-- Remove the noise insulation, refer to Overview - Herbie Beetle Decorative Film .

-- Disconnect the connector -3-.

Fig 1: Identifying Oil Level Thermal Sensor

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the nuts -1- and the Oil Level Thermal Sensor -G266- -4-.