LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (1.8L & 2.0L - Lubrication - Engine Code(S): CPKA, CPLA, CPPA & CPRA (Convertible)) >> 17 Lubrication >> Removal And Installation >> Mechanical Switch Valve >> Installing

Mechanical Switch Valve: Installing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, and 2014 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Always replace gaskets and seals.

Secure all hose connections with hose clamps.

-- Coat the mechanical switch valve O-rings with engine oil and install the mechanical switch valve.

-- Install the engine oil cooler, refer to ENGINE OIL COOLER .

scientia non olet · About LEMON Manuals