LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (2.0L - Lubrication - Engine Code(S): CBFA & CCTA (Convertible)) >> 17 Lubrication >> Specifications >> Fastener Tightening Specifications >> Oil Separator Bolt Tightening Sequence and Specification

Oil Separator Bolt Tightening Sequence and Specification

WARNING: This page is about a different car, the 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Oil Separator Bolt Tightening Sequence
GWWA17-10423Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Tighten the bolts in sequence -1 through 9- to 9 Nm.

scientia non olet · About LEMON Manuals