LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (2.0L - Lubrication - Engine Code(S): CBFA & CCTA (Convertible)) >> 17 Lubrication >> Removal And Installation >> Oil Separator >> Removing

Oil Separator: Removing

WARNING: This page is about a different car, the 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the noise insulation. Refer to Removal and Installation .

-- Remove the bolts in sequence -9 through 1- and remove the oil separator.

Fig 1: Identifying Oil Separator Bolt Tightening Sequence
GWWA17-10423Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
CAUTION: Risk of contaminating the lubricating system.
  • Seal the opening with a clean cloth.
scientia non olet · About LEMON Manuals