LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Controls, Housing - Direct Shift Gearbox 02E (Convertible)) >> 34 Controls, Housing >> Specifications >> Fastener Tightening Specifications >> Transmission To Engine Tightening Specifications

Transmission To Engine Tightening Specifications

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Transmission to engine: 2.0L TDI; 2.0L TFSI (transmission flange face)

Fig 1: Direct Shift Automatic Transmission To Engine Mounting Bolts
GWWA34-10045Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Item Bolt Nm
1 M12 x 55 80
2 M10 x 45
  • Starter to transmission
 40
3 M12 x 55
  • Is accessible only through the opening in the removed starter
 80
4 M10 x 45 or M10 x 40
  • Starter to transmission
 40
5 M12 x 65 or M12 x 70 80
6 M10 x 50 40
7 M10 x 50 40
8 M10 x 50 40
9 M12 x 65 or M12 x 70 80
10 M12 x 55 80
A Alignment sleeve for centering
scientia non olet · About LEMON Manuals